Cutting/shortening nylon duty belt
Cutting/shortening nylon duty belt
I've got a 2" nylon duty belt I like besides the excess length. It's folded over enough on either side of the buckle that my Velcro inner nor keepers will work on the front 1/3-1/2 of the belt.
Any suggestions/experiences on appropriate method to cut/shorten it?
Any suggestions/experiences on appropriate method to cut/shorten it?
Re: Cutting/shortening nylon duty belt
I would bring it in to a tailor or order a new one.
CORRECTIONAL OFFICER
Re: Cutting/shortening nylon duty belt
They're a PITA to cut...
Get one that is the right size for you.
Get one that is the right size for you.
Admit nothing.
Deny everything.
Make counter accusations...
Deny everything.
Make counter accusations...
Re: Cutting/shortening nylon duty belt
I've cut down a nylon tool belt with a small blow torch, looked a bit rough, but obviously for a tool belt it's appearance afterwards would not matter.
Although for a duty belt if you are only cutting down the part that is folded over on the back then I think you could get away with it.
Also I was just thinking that you could get some Velcro strips and stick them on the inside of the belt where the belt's Velcro is covered up. Like in this video. https://www.youtube.com/watch?v=bt1ghviEwBA
As well, keepers for a 2.25" belt might fit.
Although for a duty belt if you are only cutting down the part that is folded over on the back then I think you could get away with it.
Also I was just thinking that you could get some Velcro strips and stick them on the inside of the belt where the belt's Velcro is covered up. Like in this video. https://www.youtube.com/watch?v=bt1ghviEwBA
As well, keepers for a 2.25" belt might fit.
- Dave Brown
- Site Admin
- Posts: 1806
- Joined: Tue Oct 10, 2000 1:01 am
- Location: Winnipeg, MB
- Contact:
Re: Cutting/shortening nylon duty belt
Use a Weller pistol-type soldering iron. It cuts and seals the nylon all at the same time. Not 100% pretty but if you work carefully, it comes out okay.
- Hattie
- Veteran Member
- Posts: 168
- Joined: Fri Jun 24, 2016 11:23 pm
- Location: Here. Sometimes over there. Or other times over by that tree...
- Contact:
Re: Cutting/shortening nylon duty belt
Dave Brown wrote:Use a Weller pistol-type soldering iron. It cuts and seals the nylon all at the same time. Not 100% pretty but if you work carefully, it comes out okay.
So, you pretty much have to weld these things...
*4 years later... I've... I've finally... done IT!!! I have painstakingly toiled away and gone through thousands of belts but I've finally perfected the Art of Nylon Duty Belt Modifications


Or I guess the easier option is to buy a newer one. I may have to do that at some point but for now I can live with the excess.

Humour and sarcasm are my default options. Except on Tuesdays.
- Mr. Islander
- Seasoned Member
- Posts: 304
- Joined: Mon Nov 28, 2011 6:52 pm
- Contact:
Re: Cutting/shortening nylon duty belt
Just buy a new one.
Get the 5.11 Sierra Bravo. Best duty belt I've ever worn, and the buckle is tiny which is great for all the crap we have to wear these days.
Get the 5.11 Sierra Bravo. Best duty belt I've ever worn, and the buckle is tiny which is great for all the crap we have to wear these days.
- mack_silent
- Rookie Member
- Posts: 23
- Joined: Sun Apr 19, 2009 12:36 am
- Contact:
Re: Cutting/shortening nylon duty belt
I checked out the sierra bravo belt at the 5.11 store, it does look really nice, but the price is really high.
How is it for comfort compared to a regular nylon belt? Does the thinner build make it easier on the back and hips?
How is it for comfort compared to a regular nylon belt? Does the thinner build make it easier on the back and hips?
KCCO. Wake up. Kick butt. Repeat.
- Mr. Islander
- Seasoned Member
- Posts: 304
- Joined: Mon Nov 28, 2011 6:52 pm
- Contact:
Re: Cutting/shortening nylon duty belt
mack_silent wrote:I checked out the sierra bravo belt at the 5.11 store, it does look really nice, but the price is really high.
How is it for comfort compared to a regular nylon belt? Does the thinner build make it easier on the back and hips?
It's only $70 dollars, pretty much on par with most other duty belts.
Haven't really noticed a difference comfort wise, but it's an extremely strong belt and isn't as thick as others, so it fits tighter against the waist and feels much more secure.The keepers that come with it are the best I've ever used as well.
The big feature of the belt is the buckle though. You save so much room by having it lock up/down instead of side/side. Pretty much a necessity if you're not a big guy and don't have a whole lot of room to work with. Some guys load their vest with a lot of pouches, but it looks so tacky and there's some officer safety issues, so this is definitely a better option. It's the only belt I'm aware of that comes with such a small buckle.
Who is online
Users browsing this forum: No registered users and 1 guest